EML (Diamond Lath) Stainless Steel 700mm x 2.5m

Multi-coat render beads and lath - External Use

Acts as a carrier for plaster where no key or backing is present
Can be used over chases/columns to prevent cracking
Can be moulded into curves/arches
Can easily be cut to size using tin-snips or aviation cutters
Stainless Steel for external use
Fixing Type: Stainless Clout Nails/Stainless Screws+Washers
Must be spaced off substrate by 5-6mm
Movement joints must be provided every 5m, horizontally and vertically for cement based render
Do not use with Gypsum based plasters
Overlap sheets 50mm along short edge, and 25mm along long edge. Fixings to perimeter at 150mm intervals through ribs, central fixings at max 600mm every 2nd rib
If overlaps are unsupported, they must be wire-tied at 150mm centres. Sheets should be arranged in a staggered (brick bond) pattern